Does Fox Kashima Coat make a difference? In layman’s terms, Kashima Coat offers negligible difference in friction. A lubricated nickel plated stanchion can have a coefficient of friction as low as 0.12, compared to the 0.17 of non-lubricated Kashima Coat (Teflon is 0.04).
How often should I service my FoX 36? Fox Suspension Service. Fox recommends that the minimum suspension fork and shock service is 125 hours of use, yearly, or whichever comes first.
How do you replace a Fox 36 air shaft?
How do I increase travel on Fox 36? 2018 36mm FLOAT forks can be travel adjusted by replacing the air shaft assembly. 36mm FLOAT NA2 forks can be reduced in travel as low as 100mm (831 air shaft). Certain 36mm FLOAT forks may have their tavel extended only if they were built with a damper that can be extended safely to the new longer travel.
Does Fox Kashima Coat make a difference? – Related Questions
How much air do I put in my fork?
How much air should I put in my suspension?
As a rough guideline, you should aim for a sag of about 20 % for the fork and 30 % for the rear shock. If yours is less than that, you can simply let some air out. If it’s more than that, you can add air with a shock pump. Recommended percentages or not: What matters most is that you feel comfortable on your bike.
What is better Fox 38 or Fox 36?
By their measurements, Fox says that the 38 fork is “31% stiffer transverse shear, 17% stiffer fore/aft, and 38% torsionally stiffer than the 36.” All that material does make the fork a fair bit heavier, tipping the scale roughly 300g deeper than the 36 that we tested last season.
Whats better FOX 34 or 36?
Fox Cuts Weight, Adds Performance to the Super-Popular 34 Suspension Fork. The 2022 Fox 34 inherits 36 technology and comes out a smoother, faster fork. The Takeaway: Revised with a bit of the 36’s magic, the new 34 is a smoother, better-performing fork.
Are air forks better than coil?
If you ride cross country, stick with air forks – they are easier to use, and provide good performance across all but the extremes. If your bike takes some big hits and impacts, use a coil fork – they are stronger and you cannot beat the coil setup for bigger hits.
Can a Fox 36 go to 170mm?
With the introduction of the Fox 38, the 36 is no longer available with 170mm travel as stock, but 150mm or 160mm of travel instead.
What does the Kashima coating do?
Developed by the Japanese Miyaki Company and used exclusively in the bike industry by Fox, Kashima Coat is an anodised layer of molybdenum disulphide imbedded into the surface of an alloy. This provides enhanced lubrication and a harder wearing surface, increasing shock smoothness and sensitivity.
How long do Fox coilovers last?
Fox recommends having them rebuilt every 50,000 miles (or 80,467 kms) for street use and every 10,000 miles (or 16,093kms) for a 50/50 mix of street and off road use. That means these could be the last shocks you ever buy for your rig!
