How do I know my chain link size? Chain Link Sizes: How to Measure Chain Link Sizes
- Pitch is measured by finding the distance from the center of one pin to the center of the next pin in line. …
- Determine your side plate height and thickness by measuring both inside and outside the roller chain to ensure that you’re seeing a good average size.
What does S56 mean on chainsaw chain? The Oregon S56 is designed to fit all chainsaw brands, with models that require a 3/8 Inch pitch, .050 Inch (1.3 mm) gauge, with 56 drive links. Fits chainsaw models from several brands including Makita, Echo, Husqvarna, Craftsman, Poulan and more.
What does full chisel chainsaw chain mean? Full chisel chainsaw chain has squared, sharply pointed cutters that cut wood aggressively. They allow the chain to move through wood quickly, which is why full chisel chain often is considered the best professional chainsaw chain. The cutters on semi chisel chainsaw chain, however, are rounded.
What does the G mean on Oregon chain? What is chain gauge? Chain Gauge is the Drive Link’s thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Learn more.
How do I know my chain link size? – Related Questions
Do chainsaw chains have a master link?
Many chainsaw chains now come with a master link. A master link is specifically designed to be easily removed in the event that the chain needs to be shortened.
What does 72 mean on a chainsaw chain?
.058” 63. .063” The final set of numbers show how many drive links are in the chainsaw chain that will run on that specific bar. This bar has “72” stamped, so it would need a 72 drive link chain.
What is the fastest cutting chainsaw chain?
The fastest cutting chainsaw chain is either a full chisel or a chisel skip chain. The full chisel offers the fastest and most aggressive cutting action for chainsaw bars that are 24” or less. For bars that are longer than 24”, choose a chisel skip chain.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
What is the standard chainsaw chain size?
Most saws use 0.325″, 3/8″, or 0.404″ pitch, with 1/4″ less common. Most consumer saws use a type of 3/8″ chain called “low profile”. We call it Picco. A few older saws use 1/2″ pitch chain.
How do I know what chain fits my chainsaw?
To get a chain that is the correct size you need to count the drive links (those little teeth on the underside of the chain). One tip is to place a strip of tape on the first link and count your way around. You need to know exactly how many there are to get the correct chain size for your chainsaw.
Are replacement chainsaw chains universal?
Are chainsaw chains interchangeable? Several manufacturers produce chainsaw chains, and the different brands are not interchangeable with all models. If you replace your chain with another brand, you must know the exact gauge, length, and pitch of the old chain.
How do I know what size chain to buy?
First, wrap the ribbon around the base of the wearer’s neck, and mark the spot where the ends meet. Then, lay the ribbon against a yardstick or ruler to determine approximate neck size. After a measurement is obtained, its a good idea to opt for a necklace size that is at least the second size up from your neck size.
How do I know what chain size to buy?
Add the multiplied chainstay length, the divided number of teeth for the chainring and rear sprocket, and add 1 (or 2.5 cm). The result is the ideal chain length for your bike. For example, you’d add 32.5, 13, 7 and 1 to get 53.5. The length of the chain should be 53.5 inches or 135.89 cm.
Does gauge matter on chainsaw chain?
The gauge measurement of a saw chain tells a pro user about the strength of a chain’s drive links. Thicker drive links are usually stronger, but they are heavier. Weight affects performance, and to maximize cutting speed, weight should be kept to a minimum.
