How do I know my JST connector size?

How do I know my JST connector size? JST connectors are mostly identified by the length between one contanct to the centre of another contact. There are always between two to higher contacts in a single line. Some families have multiple rows as well. This length is the pitch of the connector type and determines the family that the connector is a part off.

What does JST connector stand for? JST connectors are electrical connectors manufactured to the design standards originally developed by J.S.T. Mfg. Co. (Japan Solderless Terminal). JST manufactures numerous series (families) and pitches (pin-to-pin distance) of connectors.

How do I depin a JST connector?

Is Molex and JST same? Surplus inventory are frequently mislabeled and some connectors look too much alike. The Molex PicoBlade is a 1.25 mm pitch connector frequently confused with JST GH in the same pitch. This mystery “JST connector” has the 1 mm pitch of the JST SH, but the datasheet says it is too large to be one.

How do I know my JST connector size? – Related Questions

What are the 3 types of connectors?

By Michael Pecht and San Kyeong electrical connectors. Electrical connectors are classified into three types based on their termination ends: board-to-board connectors, cable/wire-to-cable/wire connectors, and cable/wire-to-board connectors.

How do you count pins on a connector?

Column count is simply starting at the bottom of the row on the right (female) on the left (male) and count up to the top. You then pick up the count at the bottom of the next row to the left/right and count to the top again. The pattern shown is for a 50 pos.

How can you tell a male from a female connector?

A male connector is commonly referred to as a plug and has a solid pin for a center conductor. A female connector is commonly referred to as a jack and has a center conductor with a hole in it to accept the male pin.

How do I remove a pin from a JST plug?

How do you use the JST crimp tool?

How do I remove pins from my connector?

What is a DuPont connector?

“DuPont connector” is a vernacular term which refers to a number of different types of 0.1″ pitch connector. They feature black plastic housings which retain contacts with fingers built into the housing body. All are very similar in appearance but vary significantly in quality and price.

What is jst zh?

The JST ZH connector range is a compact 1.5 mm pitch low profile Wire to Board system. With a thickness of 3.5 mm, an above board height of 5.6 mm for the Top Entry type and 3.7 mm for the Side Entry type the ZH range can provide space saving in various applications.

What is a sm connector?

The SM series are 2.5mm (.098″) pitch, wire-to-wire connectors that perform. reliably in high-density, small current applications.