What is the difference between 3/8 and .325 chain? The three-eighths chain is a beefier saw and better suited to one that has more horsepower. It has larger teeth and a heavier duty chain, so it requires more horsepower to operate correctly. Older saws tend to have a three-eighths chain and tends to be less expensive than its newer cousin.
What is the difference between 3/8 and 404 chainsaw chain? 3/8″ has the same rivet measurement as 3/8LP but has a larger cutting tooth and deeper drive link than 3/8LP. . 404” chain is fitted to large chainsaws generally over 90cc motor capacity.
What is 3/8 pitch on chainsaw chain? If you decide to measure the pitch yourself, just remember to measure between the middle points of 3 rivets on the chain, and then divide the number by 2. So, for a 3/8″ pitch chain, the measurement between three links would be 3/4″ (. 75″), which is 3/8″ (. 375″) when divided by 2.
How do you know what size file to use to sharpen a chainsaw? Simply put, the type of chainsaw file you need directly corresponds with the size of your chain pitch. The larger the pitch will mean the higher the cutting teeth will be. The higher the teeth will therefore mean the larger the file will need to be.
What is the difference between 3/8 and .325 chain? – Related Questions
How many times can you sharpen a chainsaw chain?
A chainsaw chain can be sharpened up to 10 times, sometimes more, before the entire chain needs replacing. It’s mostly dependent on two things; the amount of wear your chain incurs and the amount of metal removed every time you sharpen. Different materials can have a harder impact on the chainsaw chain.
What is a low profile chainsaw chain?
Low profile or “lo pro” chain uses cutters that aren’t as tall as the cutters on standard chainsaw chain. This means that low profile chain makes a shallow cut. The advantage of using low profile chain is that it weighs less than standard chain, which makes it a good fit for low-horsepower saws and electric saws.
What size file do I need for a .325 chain?
1 dozen of 3/16in (4.8mm) by 8 inch round files for . 325 pitch chain. The superior file for sharpening saw chains is the Swiss-made double-cut file from Oregon.
What do the numbers mean on a chainsaw chain?
The final set of numbers show how many drive links are in the chainsaw chain that will run on that specific bar. This bar has “72” stamped, so it would need a 72 drive link chain. Drive link count can range anywhere from 28 to 210 depending on your bar size.
What is a 404 pitch on a chainsaw?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What chainsaw chain do professionals use?
Typically only professionals and experienced chainsaw users use full chisel chainsaw chains. They are typically used to cut through hardwood such as oak as their square-cornered cutting teeth are more geared up to power through the wood.
Does gauge matter on chainsaw chain?
The gauge measurement of a saw chain tells a pro user about the strength of a chain’s drive links. Thicker drive links are usually stronger, but they are heavier. Weight affects performance, and to maximize cutting speed, weight should be kept to a minimum.
What chainsaw pitch is best?
A Full Chisel is an aggressive chain on chainsaw bars that are 24”or less. When cutting deep, long cuts with a bar longer than 24”, a Chisel Skip Chain is most efficient and aggressive. A . 404″ chainsaw pitch is the most aggressive chainsaw chain pitch for professional arborists.
How do I know what pitch my chainsaw chain is?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
